My research interests and activities over the past decades
Microscale and low pressure flows; Acoustic/fluid
mechanic interactions;
Transport in
Near-Critical Fluids; Hazardous waste management;
Plasma Processing in reactors and furnaces;
Transport phenomena
in materials processing; Combustion and fires;
Multiphase flows;
Computational methods in fluid mechanics and heat transfer;
Convective and radiative heat transfer; Heat transfer in microgravity
Current Interests (2010
- present)
'Atmospheric
pressure direct current H2/CH4 micro-glow discharge
simulations: Effects of
external circuit', with T. Farouk and D. S. Antao, Plasma Source
Science and Technology
(in press)
‘Fast Heating Induced Thermoacoustic
Waves in Supercritical Fluids: Experimental and
Numerical Studies’,
with N. Hasan, Journal of Heat Transfer (in
press)
‘Mass
Transfer Enhancement in Supercritical Fluid Extraction by Acoustic
Excitations’, with N.
Hasan, Journal of Supercritical Fluids
(in press)
‘High amplitude non-linear acoustic wave
driven flow fields in circular and conical resonators’,
with D. Antao, Journal
of the Acoustical Society of America (in press)
"Electroosmotic
Augmentation in Flexural Plate Wave Micropumps', with
E. Sayar, Journal of
Microelectromechanical Systems, Vol. 22, 2, 372-385, 2013
‘Experimental and Numerical Investigations
of an Orifice type Cryogenic Pulse Tube
Refrigerator’ with D. Antao,
Applied Thermal Engineering, Vol. 50, 1, 112–123, 2013
‘Multifield
Analysis of a Piezoelectric Valveless Micropump: Effects of Actuation Frequency and
Electric Potential’ with E. Sayar, Smart Materials and Structures ,
Vol. 21, No. 7, 75002-75015, 2012
‘Molecular Dynamics Simulations of Carbon Nanotube Dispersions in Water: Effects of Nanotube
Length, Diameter, and
Chirality and Surfactant Structures’, with N. Uddin and F. Capaldi
Journal of
Computational Materials Science Vol. 53, 133–144, 2012
" Development of Metamodels
for Predicting Aerosol Dispersion in Ventilated Spaces", with
S. Hoque and C. N. Haas, Atmospheric Environment, Vol. 45,
1876-1887, 2011
‘Acoustically
Generated Flows in Microchannel Flexural Plate Wave
Sensors: Effects of
Compressibility’ with
E. Sayar, Sensors and Actuators A Vol 171, 317-323, 2011
‘3-D Simulations of Electroosmotic
Sample Migration in Microchannels: Effects of Surface
and
Solution Property Variations’, with D-H Lee
and H. Noh, Separation Science and Technology,
Vol. 46: 1377–1387, 2011
‘Development of metamodels
for predicting aerosol dispersion in ventilated spaces’, with
S. Hoque and C. N. Haas, Atmospheric
Environment, 45, 1876-1887, 2011
‘Molecular
dynamics simulations of the interactions and dispersion of carbon nanotubes in
polyethylene oxide/water systems’, with N. M. Uddin and F. M. Capaldi, Polymer 52,
288 – 296, 2011
2000 - 2010
‘Molecular Dynamics Simulations of
Dispersion of Carbon Nanotubes in Water:
Effects of Nanotube
Orientation and Surfactant Addition’,
with N. Uddin, and F. Capaldi,
ASME Journal of Engineering Materials
and Technology Vol. 132, 021012-2 - 021012-25, 2010
‘Process,
Structure, and Properties of Electrospun Carbon Nanotube Reinforced Nanocomposite
Yarns’
with N. Uddin, F. Ko,
J. Xiong, and F. Capaldi, Research Letters in Materials Science 2009
‘Stabilization of the Ionization
Overheating Thermal Instability in Atmospheric Pressure Microplasmas’,
with
D. Staack, A. Gutsol and A.
Fridman, Journal of Applied Physics, Vol. 106, 013303-1 -013303-7, 2009
‘Simulation of Gas Species and
Temperature Separation in the Counter-flow Ranque–Hilsch
vortex
tube using the large eddy simulation technique’, with T. Farouk,
Int. J. Heat Mass Transfer, Vol. 52. 3320–3333, 2009
‘Countercurrent Gas/Liquid Flow and Mixing:
Implications for Water Disinfection’, with
T. Bartrand
and C. N. Haas, Int. J. Multiphase Flow, Vol. 35, 171–184, 2009
‘DC normal glow discharges in atmospheric
pressure atomic and molecular gases’ with D. Staack,
A. Gutsol and A. Fridman, Plasma Sources Sci. Technol. Vol. 17,
025013-024025 (2008)
‘Interactions of Thermally Induced
Acoustic Waves with Buoyancy Induced Flows in
Rectangular Enclosures’, with Y. Lin and
E. S. Oran, Int. J. Heat Mass Transfer Vol. 51,
1665-1674, March 2008
‘Experimental and Numerical Studies of
Thermally Induced Acoustic Waves in a Closed
Enclosure’ with Y. Lin, AIAA Journal
of Thermophysics and Heat Transfer, Vol. 22, 105-114,
January 2008
‘Computational Fluid Dynamic Analysis of
the Effects of Reactor Configuration on Disinfection Efficiency
‘,
with D. G. Greene, and C. N. Haas , Water
Environment Research, Vol. 78(9), 909-919, October 2006
‘Flows Induced by Thermoacoustic
Waves: Effects of Gravity’, with Y. Lin and E. S. Oran
AIAA Journal of Thermophysics
and Heat Transfer, Vol. 20, No. 5, 376-383, July 2006
‘Heat
Transfer Enhancement by Acoustic Streaming in an Enclosure’, with M. Aktas and Y. Lin,
ASME Journal of Heat Transfer,
Vol. 127, No. 12, 1313-1321, December 2005
‘Numerical Simulation of Acoustic Streaming
Generated by Finite Amplitude Standing Waves in an Enclosure’,
with
M. Aktas, Journal
of the Acoustical Society of America, Vol. 116, No. 5, 2822-2831, November
2004
‘Numerical Simulations of Electrostatically
driven Liquid Jets’, with F. Yan and F. Ko,
Journal of Aerosol Sciences, Vol. 34, 99-116, February
2003
‘Computations
of Mixing of Two Parallel Gas Streams in Microchannels using Direct
Simulation Monte Carlo Method’,
with F. Yan, Microscale
Thermophysical Engineering, Vol. 6, 3, 235-251,
August 2002
‘Effects
of Design and Operating Variables on Process Characteristics in RF Methane
Discharge’,
with K. Bera and
Y. Lee, Plasma Sources Science and
Technology, Vol. 10, 211-225, June 2001
‘Inductively
Coupled RF Methane Plasma Simulation’, with K. Bera and
P. Vitello,
Journal of Applied Physics D, Vol. 34,
1479-1490, May 2001
1990 - 2000
‘Thermoacoustic Waves in an Enclosure’ with E. S. Oran and
T. Fusegi,
Physics of
Fluids B, Vol. 12, No.5, 1052-1061, May 2000
Experiments’, with K. Bera, W. J. Yi and Y.H.
Lee, IEEE Transactions on Plasma Science,
Vol. 27, No. 5,
1476-1486, October 1999
Reactor’,
with K. Bera. W. J. Yi and Y.H. Lee, Journal of the
Electrochemical
Society, Vol. 146, No. 9,
3264-3269, December 1999
‘Heat Transfer from a
Liquid Bath due to an Impinging Gas Jet: Effect of Liquid Prandtl
Number ‘
with F. Qian, R. Mutharasan and N. Macken , ASME Journal of Heat Transfer,
121, 333-340, May
1999
‘Modeling of
Thermal Treatment of Solid Wastes in Electric Arc Melters
for Materials Recovery’,
with A. Wenger and K. Wittle, Journal of Air and Waste Management, 49,
279-288, March 1999
‘Two- and
Three-phase Flows in Bubble Columns: Numerical Predictions and Measurements’,
with D. Mitra-Majumdar , Y.T. Shah, N. Macken
and Y. K. Oh, Ind. Engineering Chem. Research,
37 (6), 2284-2292,
June 1998.
‘Thermal
Conductivity of DLC (Diamond-like Carbon) Films and its Relation to Mechanical
and
Chemical
Properties’, with C. Mesyngier, Y.H. Lee, J.W. Yi and
D.W. Brown,
Journal of
Chemical Vapor Deposition, 6, 4, 323-337, April 1998
‘Modeling of RF
Plasma Discharge of Methane for Carbon Film Deposition’, with K. Nagayama and Y.H. Lee,
IEEE Transactions on Plasma Science ,
26, 2, 125-134, April 1998
‘Modeling a
Direct-Contact Condenser for Metal Recovery’, with H. Turkoglu
and L. Yang,
Numerical Heat
Transfer, Part A, Vol. 33, 457-475, March
1998
‘Modeling of
Granular Flow and Heat Transfer of Contaminated Soil within a Rotary Calciner’,
with L. Yang, Journal
of Air and Waste Management, Vol. 47, 1189-1196, November 1997
‘‘Studies of
Deformations in a Liquid Bath due to Direct Impinging Gas Jet’, with F. Qian
and R. Mutharasan, Metallurgical and Materials Transactions B, 27B, 911-920,
December 1996
‘Neutral and Charged Particle Simulations of Ar Plasma’, with K. Nagayama and
Y.H. Lee,
Plasma Sources
Science and Technology, Vol. 5, 685-695, 1996
‘Phase-resolved
Measurements in a Gas-injected Liquid Bath’, with H. Turkoglu,
International Journal of Heat and Mass
Transfer, Vol. 39, No. 16, pp. 3401-3416,
November 1996
‘Turbulent Natural Convection
- Non-Gray Radiation Analysis in a Square Enclosure’
with C. Mesyngier, Numerical Heat Transfer, Part A, Vol. 29,
pp.671-687, June 1996
‘Numerical
Simulation of Subcooled Boiling of Heat Transfer in a
Vertical Pipe’, with J. C. Lai,
International Journal of Heat & Mass Transfer , Vol. 36, No. 6,
1541-1551, April 1993
‘Three Dimensional Mixed Convection Flows in a
Horizontal Annulus with a Heated Rotating
Inner Circular
Cylinder’, with L. Yang, International Journal of Heat & Mass Transfer,
Vol. 35, No. 8,
1947-1956, November 1992
‘Effect of Gas
Injection Velocity on Mixing and Heat Transfer in Molten Steel Baths’, H. Turkoglu,
Numerical Heat
Transfer, Part A, Vol. 21, 377-399, October 1992
‘Three-Dimensional
Predictions of Silicon Deposition in a Barrel Reactor’, with L. Yang
and R. L. Mahajan , Journal of Electrochemical Society, Vol. 139, No. 9, 2666-2673, September 1992
‘A Numerical and
Experimental Study of the Solidification Processes in a Twin-Belt Caster’,
with D. Apelian and Y. G. Kim ,
Metallurgical Transactions B ,
Vol. 23, 477-492, August 1992
‘Numerical
Simulations of the Structure of Supersonic Shear Layers’, with E. S. Oran
and
K. Kailasanath, Physics
of Fluids , Vol. 3, No. 11, 2786-2798, November 1991
‘Numerical
Computations of Fluid Flow and Heat Transfer in Gas Injected Iron Baths’,
with H. Turkoglu, The
Iron and Steel Institute of Japan Journal,
Vol. 30, 961-970, November 1990
1980
- 1990
‘Effects of
Particle Loading on R.F. Inductively Coupled Plasma Torch Flowfield
and
Particle
Melting Behavior’, with D. Wei and D. Apelian,
Metallurgical Transactions B
Vol. 20,
949-958, December 1989
‘A Flow
Visualization Study of the Effects of Buoyancy on Taylor Vortices’,
with K. S. Ball, Physics
of Fluids A, Vol. 1, No. 9, 1502-1507, September 1989
‘Natural Convection
- Radiation Interactions of a Non-gray Gas in a Square Enclosure’
with T. Fusegi, Numerical Heat Transfer, Part A, Vol. 15,
303-322, May 1989
‘Particle
Melting in High Temperature Supersonic Low Pressure Plasma Jets’,
with D. Y. C. Wei
and D. Apelian , Metallurgical Transactions B ,Vol. 20, No. 2, 251-262,
April 1989
‘Natural
Convection of a Variable Property Gas in Asymmetrically Heated Square
Cavities’,
with T. Fusegi , AIAA
Journal of Thermophysics and Heat Transfer, Vol. 3, No. 1, 85-87, January
1989
‘Numerical
Study on Interactions of Turbulent Convection and Radiation in
Compartment
Fires’ with T. Fusegi, Fire Science and Technology, an
International Journal,
Vol. 8, No. 1,
15-28, December 1988
‘Bifurcation
Phenomena in Taylor-Couette Flows with Buoyancy Effects’, with K. S. Ball ,
Journal of
Fluid Mechanics, Vol. 197, 479-501, December 1988
‘Melting
Metal Powder Particles in an Inductively Coupled R. F. Plasma Torch’,
with D. Wei and D. Apelian, Metallurgical Transactions B, Vol. 19,
213-226, April 1988
‘Melting Powder
Particles in a Low Pressure Plasma Jet’, with D. Wei and D. Apelian ,
ASME Journal
of Heat Transfer
,
Vol. 109, 4, 971-976, November 1987
‘Predictions of Fluid Flow and Heat Transfer
Problems by the Vorticity-Velocity
Formulation of
the Navier-Stokes Equations’, with T. Fusegi,
Journal of
Computational Physics, Vol. 65, No. 1, 57 -74, July 1986
‘An
Experimental Study of Mixed Convection around a Rotating Isothermal Cylinder’,
with K. S. Ball, International Communications in Heat and Mass Transfer,
Vol. 12, No. 6,
657-666, November 1985
‘Mixed
Convective Flows around a Slowly Rotating Isothermal Sphere’,
ASME Journal
of Heat Transfer, 107, 431-438, May 1985
‘Transient and
Steady State Natural Convection in a Porous Medium between
Two Concentric
Cylinders’, with G. N. Facas, ASME Journal of Heat
Transfer,
105, 660-663,
August 1983
‘Natural
Convection from Horizontal Cylinders in Interacting Flow Fields’,
with S. I. Guceri, International Journal of Heat and Mass Transfer Vol. 26, No. 2,
231-244,
February 1983
‘Natural
Convection from a Horizontal Circular Cylinder-Turbulent Regime’, with S.I. Guceri,
ASME Journal
of Heat Transfer 104, 228-235, May 1982
‘Natural
Convection from a Horizontal Circular Cylinder - Laminar Regime’,
with S.I. Guceri, ASME Journal of Heat Transfer, 103, 522-527,
August 1981
1977 -1980
‘Trombe-Michel Wall Using Phase Change
Materials’, with S.I. Guceri, Proceedings, 2nd Int.
Conf. on Alternate
Energy Sources, Vol. 2, Hemisphere Publishing Corp., New York,
N.Y., 493-502, December 1979
‘Temperature Regulation of Residential Air
Spaces Using Phase Change Materials’, with S.I. Guceri,
Proceedings,
Solar Energy and Conservation Workshop, Vol. 1, Pergamon
Press, Elmsford, New York,
367-392, December 1978
‘The Free Shear Layer Edgetone
Phenomena’, Eighth Southwestern Graduate Research Conference in
Applied
Mechanics, Proceedings, The University of Texas in
Austin, D6, April 1977