Professor Bakhtier Farouk                 Last updated: May 2011

 

 

 NON-REFEREED CONFERENCE PAPERS AND REPORTS

 

72.        “Characterization of Atmospheric Pressure Plasma Discharges for High-Rate Thin Film Deposition”,

              Sixth Asia-Pacific International  Symposium   on the  Basics and Applications of Plasma Technology”

              with T. Farouk, and  A. Fridman,, Hsinchu, Taiwan,  December 14-16, 2009

 

71.        Flow and Heat Transfer Processes in an Inertance type Pulse Tube Refrigerator”, with D. Antao,

             16th International Cryocooler Conference, Atlanta,  Georgia, May 2010 

 

70.        “Simulation of Heat and Mass Transfer in Supercritical Carbon Dioxide” B. Farouk, Z. Lei and

            E. S. Oran, APS/DFD Meeting, San Antonio, TX, November 22-25, 2009

 

68.       “Simulation of Flows and Heat Transfer in a Supercritical Carbon Dioxide Filled Enclosure”,

            With Lei, Z., Bulletin of the American Physical Society, Vol. 51, No. 9, p. 119,

            APS Division of Fluid Dynamics Meeting, Tampa Bay, FL, November 2006

 

67.       “Atmospheric Pressure DC and RF Plasma for Materials Processing”, with Staack, D.,

            Fridman, A. and Gutsol, A., Bulletin of the American Physical Society, Vol. 51, No. 7, p. 359,

            APS-Division of Plasma Science Meeting, Philadelphia, PA, November 2006.

 

66.       “Simulation of Electrokinetically Driven Flows in 3-d Rectangular Microchannels: Effect of Zeta

            Potential on Sample Band Broadening”, with Lee, D-H, and Noh, H., The Eighteenth

            International Symposium on Transport Phenomena, Daejeon, Korea, 27-30 August, 2007

 

66.       “A Computational Fluid Dynamics Approach for Optimization of a Sensor Network”, with Hamel, D. Chwastek,

             M., Dandekar, K, Kam, M., IMS 2006 - IEEE International Workshop on Measurement Systems for Homeland Security,

            Contraband Detection and Personal Safety, Alexandria, VA, USA, 1-10, October 2006

 

65.       “Design, Construction and Operation of a Traveling Wave Pulse Tube Refrigerator’ with S. Rotundo,

            G. Hughel, A . Rebarchak and Y. Lin, Cryocoolers 14 (Eds.: S. D. Miller and R. G. Rose, Jr.), ICC Press, June,

            2006, 149-156

 

64.       “Development and Validation of a Numerical Model for Gas/Liquid Flow in a Countercurrent Bubble Column Reactor’

            Hydrodynamics’ with T. A. Bartrand and C. N. Haas, Third International Conference on Computational Methods in

            Multiphase Flow, Oct. 31 – Nov. 2, 2005, Portland, Maine

 

63.       “Atmospheric Pressure DC Micro Glow-Discharge” with D. A. Staack, A. Fridman and A. Gutsol,

            17th International Symposium on Plasma Chemistry, Toronto, Canada, August 2005 , pp. 281-282

 

62.       “E. coli Inactivation with Peroxyacetic Acid: Use of CFD for Wastewater Disinfection Process analysis”

            with D. Santoro, T. Bartrand, D. J. Greene, C. N. Haas, CRE-X, Mexico, August 2005

 

61.       “Effect of Tracer Density on Reactor Hydrodynamics’ with T. A. Bartrand and C.

N. Haas, Water Environment Federation: Disinfection 2005, Phoenix, Arizona, February , 2005

 

60.       “Atmospheric Pressure DC Plasma Microdischarges: A Characterization Study” with

F. Yan, J. W. Yi and A. Rebarchak, Second International Workshop on Microplasmas,

Stevens Institute of Technology, Hoboken, NJ, p. 95, October 6-8, 2004

 

59.       “Acoustically Excited and Thermoacoustically Induced Flows” with M. Aktas, ICME 2003, Dhaka,

             Bangladesh, December 2001, 97-106

 

58.       "Numerical Simulation of Thermoacoustic Wave Generation and Propagation in Water",

            with M. Aktas , Annual Meeting of the American Physical Society, Fluid Dynamics  Division,

            Vol. 48, No. 10, 241, November, 2003

 

57.       " Prediction of Acoustic Streaming Flows Generated by Standing Waves in Enclosures",

            with M. Aktas and  E. S. Oran, Annual Meeting of the American Physical Society, Fluid Dynamics  Division,

            Vol. 48,  No. 10, 249, November, 2003

           

56.       "Numerical Investigation of the Effects of Reactor Configuration on the Efficacy of Microbial

Inactivation". with D. G. Greene, and C. N. Haas, Proceedings of the WEF Annual Conference,

Los Angeles, CA., May, 2003

 

55.      "CFD Design Approach for Chlorine Disinfection Processes", with D. G. Greene, and C. N.

Haas,  Proceedings of the AWWA Annual  Conference, Anaheim, CA, March 2003

                                   

54.       “Numerical Modeling of an Electrostatically Driven Liquid Meniscus in the Cone-Jet Mode”, with F. Yan and F. Ko,

            Annual Technical Conference on the Fiber Society, Book of Abstracts, 7-10, Natick, MA, October 2002

 

53.       “Hydroelectrodynamic Modeling of the Electrospinning Process”, with F. Yan and F. Ko, TEXCOMP-6,

             International Conference on Textile Composites, Philadelphia, PA, September 2002

 

52.       “Interaction of Thermoacoustic Waves and Buoyancy-induced Flows in an Enclosure” with M. Aktas, ICME 2001,

            Dhaka, Bangladesh, December 2001, 97-106

           

51.       “Non-Continuum Transport Processes in Microscale and Vacuum Systems” with F. Yang, BSME-ASME

            International Conference on Thermal Engineering, Dhaka, Bangladesh, December 2001, 52-6

 

50.       “Disinfection Reactor Performance at Low Reynolds Numbers”, with D. J. Greene and C. N. Haas, International

            Water Association World Congress, Berlin, Germany, July 2001          

 

49.       “Simulation of Smoke Transport in a Standard Test Fire” with K.B.  McGratten and G. W. Mulholland, Proceedings,

            12th International Conference on Automatic Fire Detection, 482-493, March 2001

 

48        “Fire Detection Performance Predictions in a Simulated Multi-Room Configurations”, with T. Cleary, M. Donnelly, and

            G. W. Mulholland, Proceedings, 12th International Conference on Automatic Fire Detection, 455-469, March 2001        

 

47.       “Numerical Simulations of Liquid Transport in a Microchannel Connected Centrifuge” with F. Yan,

            Annual Meeting of the American Physical Society, Fluid Dynamics  Division, Vol. 45, No. 9, 151, November, 2000 

 

46.       “Two-Dimensional Fluid Model for Methane Discharge in an Inductively Coupled Chemical Vapor Deposition Reactor”

            with K. Bera,  IEEE International Conference on Plasma Sciences, Monte Rey, California,  147, June 1999

 

45.              “Particle and Fluid Modeling of RF Discharges for Materials Processing”, 2nd International Symposium on

            Heat and Mass Transfer under Plasma Conditions, Antalya, Turkey, April 21- 23, 1999 (in press)

 

44.       "Acoustic Wave Propagation in a Composite (Water/Air/Water) Medium", with P. Narayan, M. A. Wheatley,

             and E. S. Oran, Annual Meeting of the American Physical Society, Fluid Dynamics  Division, Vol. 43, No. 9, 2056,

            November, 1998

 

43.       "Acoustically Generated Flow and Temperature Fields in a Rectangular Cavity", with E. S. Oran,

            Annual Meeting of the American Physical Society, Fluid Dynamics  Division, Vol. 43, No. 9, 2055, November, 1998

 

42.       “Simulation of Two-dimensional Radio-Frequency Methane Plasma: Comparison with Experiments”, with K. Bera .

            W. J. Yi and Y.H. Lee, IEEE International Conference on Plasma Sciences, Raleigh, North Carolina,  268-269,

            June 1998

 

41.       "Thermoacoustic Waves in a Cavity", with E. S. Oran, Annual Meeting of the American Physical Society,

            Fluid Dynamics  Division, Vol. 42, No. 10, 22263, November, 1997

 

40.       “Effect of Reactor Pressure and Cathode Potential on Two-dimensional Radio-Frequency Methane Discharge in

            Cylindrical Coordinates” with K. Nagayama, and Y. H. Lee, Book of Abstracts,  International Symposium on

            Plasma and Flow Simulation for Materials Processing, Tohoku University, 35-37, July 1997

 

39.       "Two-dimensional Modeling of RF Methane Glow Discharge" with K. Bera, and Y. H. Lee, Proceedings I

            nternational Conference on Fluid Engineering, Vol. II,  JSME Centennial Grand Congress, Tokyo,  783-787,  July , 1997

 

38.       "Particle Simulation of CH4/H2 Radio-Frequency Glow Discharges for Diamond-like Carbon Film Deposition"

            with K. Nagayama, and Y. H. Lee, Proceedings International Conference on Fluid Engineering, Vol. II, 

             JSME Centennial Grand Congress, Tokyo, 977 - 981,  July , 1997

 

37.       “Modeling Combustion and Fly Ash Production in a Pulverized Coal-Fired Furnace”, with K. A. Chandratre and

            W. Fuchs, Technical Meeting, Eastern States Section of the Combustion Institute,  Hilton Head,

            South Carolina, 297-300, December, 1996

 

36.       “Modeling of CH4 RF Discharge for Carbon Film Deposition”, with K. Nagayama and Y.H. Lee,

             IEEE  International Conference on Plasma Sciences, Abstracts, 183, Boston, Massachusetts, June 1996

 

35.       “Two-dimensional Modeling of RF Glow Discharge”, with K. Bera and Y.H. Lee, IEEE International Conference

            on Plasma Sciences, Abstracts, 198, Boston, Massachusetts, June 1996

 

34.       “Modeling of Thermal Treatment of Hazardous Solid Wastes in a DC Arc Melter”, with A. Wenger,

            J.K. Wittle and P.J. Wilver, International Symposium on Environmental Technologies: Plasma Systems and Applications,

            Vol. II, 161-172, Atlanta, Georgia, October 1995

 

33.       “Deposition and Characterization of DLC/SiO2 Nanocomposite Prepared by Ion-Assisted PECVD”,

            with J.H. Lee, D.S. Kim and Y.H. Lee, Third International Applied Diamond Conference, NIST

             Special Publications 885,  727-730, August  1995, Gaithersburg, Maryland

 

32.       “Modeling of RF Plasma Discharges of Polyatomic Gases for Carbon Film Deposition” ,

            with K. Nagayama and Y.H. Lee, 12th Int. Symposium on Plasma Chemistry,  Vol. 4, 2247-2253, 

            August   1995,  Minneapolis,  Minnesota

 

31.       “Impinging Gas Jet on a Liquid Surface: Numerical and Experimental Studies”,  with F. Qian and  R. Mutharasan,

            1995 EPD Congress,  127-141, February, 1995, Las Vegas, Nevada

 

30.       “Studies of Deformations in a Liquid Bath due to Direct Impinging Gas Jet”, with F. Qian and  R. Mutharasan,

            Proceedings, 1994 EPD Congress, 1147-1162, February, 1994, San Francisco, California

 

29.       “Numerical Investigation of Turbulent Mixing in a Jet Bubble Column”, with Y. T. Shah and D. Mitra-Mazumdar,

            18th Technical Conference on Coal Utilization and Fuel Systems, 185-196, Clearwater, Florida, April, 1993

 

28.       “A Comparison of Air-fuel Firing to Oxy-fuel Firing in a Glass Melting Furnace”, with B. Herb, R. Saunderson and

            D. Winchester, Users Group Meeting Proceedings, creare.x Inc., 326-344, September 1991

 

27.       “Modeling of Combustion Processes in an Industrial Furnace”, with M. Sidawi and J. Appukutty, Proceedings,

            Fall Meeting of the Combustion Institute (Eastern Section), Cornell University, 50-1 - 50-4, October 1991

 

26.       "Three Dimensional Predictions of Silicon Deposition in a Barrel Type CVD Reactor", with L. Yang, TMS Annual

            Meeting, New Orleans, Louisiana, Materials Processing in the Computer Age (Eds. V. R. Voller,

            M.S. Stachowicz and B. G. Thomas), 123-129 February 1991

 

25.       "Three Dimensional Simulation of Periodic Natural Convection in a Differentially Heated Cubical Enclosure",

            with T. Fusegi, J. M. Hyun and K. Kuwahara, Third Brazilian Thermal Science Meeting Proceedings,

            Itapema, Santa Catarinia, Vol. 1, 129-133, December, 1990

 

24.       "Buoyancy Induced Instabilities in an Annulus with a Rotating Noncircular Inner Cylinder", with L. Yang,

            Annual Meeting of the American Physical Society, Fluid Dynamics Division, Ithaca, New York,  Vol. 35,

            No. 10, 2299, November, 1990

 

23.       “Three-Dimensional Natural Convection-Radiation Interactions in a Differentially Heated Cube Filled with

            Gas-Soot Mixtures” with T. Fusegi and K. Kuwahara, Eurotherm Seminar on  Heat  Transfer in Radiation and

            Combustion Systems, Springer-Verlag, 602-619,  October, 1990.

 

22.       "A Direct Simulation of Natural Convection in a Differentially Heated Cubical Enclosure", with T. Fusegi

            and K. Kuwahara  International Symposium on Engineering Turbulence Modeling and Measurements, Dubrovnik,

            Yugoslavia, 261-268, September, 1990

 

21.       “Numerical Simulations of the Structure of Supersonic Shear Layers”, with E.S. Oran and K. Kailasanath,

            Naval Research Laboratory Memorandum Report 6667, July 1990

 

20.       "Three-Dimensional Natural Convection-Radiation Interactions in a Cube Filled with a  Non-Gray Gas", with T. Fusegi,

            K. Ishii and K. Kuwahara, First International Conference on Advanced Computational Methods for Heat Transfer,

            Southampton, United Kingdom, Vol. 1, 157-168, July 1990

 

19.       "Effects of Vessel Aspect Ratio on the Mixing Rate in a Cylindrical Steel Bath with Vertical Argon Injection", with 

            H. Turkoglu, 73rd Steelmaking Conference, Detroit, Michigan,  377-385, March 1990

 

18.       "Interaction Analysis of Natural Convection and Surface/Gas Radiation in a Square Enclosure",

            with T. Fusegi, 6th International Conference on Numerical Methods in Thermal Problems, Swansea, U. K., 

            Vol. 1, 588 - 599 , July 1989

 

17.       "Numerical Simulation of the Structure of Supersonic Shear Layers", with E. S. Oran and K. Kailasanath,

            Annual Meeting of the American Physical Society, Fluid Dynamics Division, Vol. 33, No. 10, 22232, November, 1988

 

16.       "Radiation-Turbulent Natural Convection Interactions of a Non-Gray Gas in a Square Cavity",

            with T. Fusegi, 5th International Conference on Numerical Methods in Thermal Problems, Montreal, Canada,

            Vol. 1, 321-331, July 1987

 

15.       "A Critical Analysis of Proposed Plasma Jet Models to Predict Temperature and Velocity Profiles" with

            D. Wei and D. Apelian,  Materials Research Society Symposium, Anaheim , California,  41-47, April 1987

 

14.       "Effect of Particle Loading on DC Plasma Jet Profile during Low Pressure Plasma Deposition"

            with D. Wei and D. Apelian, Materials Research Society Symposium, Anaheim , California, 77-85, April 1987 

 

13.       "Melting Behavior of Powder Particles in a Supersonic Plasma Jet”, with D. Apelian and D. Wei,

            Engineering Foundation Conference on Welding and Casting Processes, Santa Barbara, California, 79 -94, January 1986

                                               

12.       "Analysis of a Twin Belt Casting Process", with Y.G. Kim and D. Apelian, Engineering Foundation Conference

            on Welding and Casting Processes, Santa Barbara, California,  169 - 178 January 1986 

 

11.       "Numerical Solutions in Laminar and Turbulent Natural Convection", Proceedings, NATO Advanced Research

            Workshop on Natural Convection - Fundamentals and Applications, (Eds. Kakac, S., Aung, W. and Viskanta, R.)

            Hemisphere Publishing Corp., 615-654, August, 1985

 

10.       "A Comparison of Particle Melting and Particle/Plasma Interaction in RF and DC Plasmas: A  Modeling Approach",

            with D. Wei and D. Apelian, Proceedings, International Symposium on Plasma Chemistry, Eindhoven,

            The Netherlands, Vol. 3, 923-930, July  1985

 

   9.      "Effects of Injector Location and Geometry on the Heat Transfer Characteristics of Metal Particles in an RF Plasma",

            with D. Wei and D. Apelian, Proceedings, International Symposium on Plasma Chemistry, Eindhoven,

            The Netherlands, Vol. 3, 810-816, July 1985

 

 8.        "Laminar Mixed Convection in the Annulus between Horizontal Concentric Cylinders with Rotating Inner Cylinder", 

            with K. S. Ball, Proceedings, Fifth IMACS International Symposium on Computer Methods for Partial Differential

            Equations, Lehigh University, Bethlehem, Pennsylvania, 80-83, June 1984

 

 7.        "Convective Heat Transfer  from a Rotating Isothermal Sphere", 20th  Society of Engineering Science Meeting,

            University of Delaware,  Abstracts Proceedings, 229-230, August 1983

 

 6.        "Natural Convection Heat Transfer from an Isothermal Sphere", Proceedings, 16th Southeastern

            Thermal Sciences Conferences, Miami, Florida, Hemisphere, Vol. 1, 347-364, April 1982     

 

  5.       "Laminar and Turbulent Natural Convection Heat Transfer from Horizontal  Cylinders",

            Ph. D. dissertation, University of Delaware, Newark, August 1981

 

 4.        "Trombe-Michel Wall Using Phase Change Materials", with S.I. Guceri, Proceedings, 2nd Int. Conf. on

            Alternate Energy Sources, Vol. 2, Hemisphere Publishing Corp., New York, N.Y., 493-502, December 1979           

 

 3.        "Temperature Regulation of Residential Air Spaces Using Phase Change Materials",

            Master's thesis, University of Delaware, Newark, Delaware, 1978

 

 2.        "Temperature Regulation of Residential Air Spaces Using Phase Change Materials",

            with  S.I. Guceri, Proceedings, Solar Energy and Conservation Workshop, Vol. 1, Pergamon Press,

            Elmsford, New York, 367-392,  December 1978 

 

 1.        "The Free Shear Layer Edgetone Phenomena", Eighth Southwestern  Graduate Research Conference in

            Applied Mechanics, Proceedings, The University of Texas in Austin, D6, April 1977