Last updated: August  2012

Professor Bakhtier Farouk                

 

 

Journal Publications

 

                                                           2011 - present

 

123.     “Molecular Dynamics Simulations of Carbon Nanotube Dispersions in Water: Effects of

Nanotube Length, Diameter, and Chirality and Surfactant Structures”, Journal of

Computational Materials Science   (under review)

 

122.     “Numerical Simulations of Transport Processes in a  Pulse Tube Cryocooler: Effects of Taper

Angle" with D. Antao, International Journal Heat Mass Transfer (under review)

 

121.     “Acoustically Generated Flows in Microchannel Flexural Plate Wave Sensors: Effects of

Compressibility” with  E. Sayar, Sensors and Actuators A (under review)

 

120.     “Generation and Propagation of Thermally Induced Acoustic Waves in Supercritical Nitrogen and Carbon Dioxide”,

            with Z. Lei, J. Supercritical Fluids (under review)

 

119.     “Dielectrophoretic Particle-Particle Interaction under AC Electrohydrodynamic Flow Conditions” with D-H Lee,

             C. Yu, E. Papazoglu and H. Noh, Electrophoresis (in press)

 

118.     3-D Simulations of Electroosmotic Sample Migration in Microchannels: Effects of Surface and Solution Property

            Variations”, with D-H Lee and H. Noh, Separation Science and Technology  (in press)

 

117.     “3-D Simulation of Electroosmotic Injection and Migration in Microchannels; Effects of Non-rectangular Cross Section”,

            with D-H Lee and H. Noh, Separation Science and Technology  (in press)

 

116.     “Molecular Dynamics Simulations of the Interactions and Dispersion of Carbon Nanotube in Polyethylene

            Oxide/Water Systems”  with  N. Uddin,  and F. Capaldi, Polymer, In press, 2010.

 

 115.     “Sensor Placement for Urban Homeland Security Applications",  with “D. Hamel, M. Chwastek,

S. Garcia,  M. Kam and K. R. Dandekar,  International Journal of Distributed Sensor Networks,

Vol. 2010, Article ID 859263, 15 pages 2010

 

114.     “Computational fluid dynamics simulations of an orifice type pulse tube refrigerator: Effects of

operating frequency”,  with D. S. Antao, Cryogenics 51,  192–201, 2011

 

113.     “Development of metamodels for predicting aerosol dispersion in ventilated spaces”, with S.

Hoque and  C. N. Haas, Atmospheric Environment, 45, 1876-1887, 2011

 

                                                        2010 - 2006

 

112.     “Computational studies of atmospheric pressure methane-hydrogen DC micro glow discharges” with T Farouk,

            and A Fridman, IEEE Transactions Plasma Science Vol. 38, No. 2,  73-85,  2010

 

111.     “Multiple Linear Regression Models Approach for Particle Dispersion in Ventilated Spaces using

            Computational Fluid Dynamics and Dimensional Analysis” S. Hoque and C. N. Haas,

            ASCE Journal of Environmental Engineering, Vol. 136, No. 4, 638 – 649, 2010

 

110.     “Molecular Dynamics Simulations of Dispersion of Carbon Nanotubes in Water: Effects of Nanotube

            Orientation and Surfactant Addition”, with N. Uddin, and F. Capaldi, ASME Journal of Engineering

            Materials and Technology Vol. 132, 021012-2 - 021012-25, 2010

 

109.     “Process, Structure, and Properties of Electrospun Carbon Nanotube Reinforced Nanocomposite Yarns”

            with N. Uddin, F. Ko, J. Xiong, and F. Capaldi, Research Letters in Materials Science Vol.  2009,

            Article ID 868917, 5 pages, 2009

 

108.     “Stabilization of the Ionization Overheating Thermal Instability in Atmospheric Pressure Microplasmas",

            with D. Staack, A. Gutsol and A. Fridman, Journal of Applied Physics, Vol. 106, 013303-1 -013303-7, 2009

 

107.     “Atmospheric Pressure DC Corona Discharges: Operating Regimes and Potential Applications”

            with D. S Antao, D. Staack, A. Fridman, Plasma Sources Sci. Technol. , Vol. 18, 035016 (11pp), 2009

 

106.     “Simulation of Gas Species and Temperature Separation in the Counter-flow Ranque–Hilsch vortex tube

             using the large eddy simulation technique”, with T. Farouk,  Int. J. Heat Mass Transfer, Vol.  52. 3320–3333, 2009

 

105.     “Countercurrent Gas/Liquid Flow and Mixing: Implications for Water Disinfection”,

            with T. Bartrand and C. N. Haas, Int. J. Multiphase Flow, Vol.   35, 171–184, 2009

 

104.     “Atmospheric pressure methane-hydrogen dc micro glow discharge for thin film deposition”

            with T Farouk, A Gutsol and A Fridman, Applied Physics D  Vol. 41, 175702-175721, 2008

 

103.     “Self-rotating DC atmospheric pressure discharge over a water-surface electrode: regimes of operation”,

            with A. Wilson, D. Staack, and A. Gutsol,   Plasma Sources Sci. Technol.  Vol. 17, 045001-025913, 2008

 

102.     “DC normal glow discharges in atmospheric pressure atomic and molecular gases” with D. Staack,

            A. Gutsol and A. Fridman, Plasma Sources Sci. Technol. Vol. 17, 025013-024025 (2008)

 

101.     “Heat transfer in a rectangular chamber with differentially heated horizontal walls: Effects of a

            vibrating sidewall” with Y. Lin,  Int. J. Heat Mass Transfer Vol. 51, 3179-3189, March 2008

 

100.     “Interactions of Thermally Induced Acoustic Waves with Buoyancy Induced Flows in  Rectangular Enclosures”,

            with Y. Lin and E. S. Oran, Int. J. Heat             Mass Transfer Vol. 51, 1665-    1674, March 2008

 

99.       “Experimental and Numerical Studies of Thermally Induced Acoustic Waves in a Closed     Enclosure” with  Y. Lin,  

            AIAA Journal of Thermophysics and Heat Transfer,  Vol. 22, 105-114, January 2008

 

98.       “Atmospheric pressure radio frequency glow discharges in argon: effects of external matching circuit parameters”,

            with  T. Farouk,  D. Staack, A. Fridman, and A. Gutsol,  Plasma Source Sci. Technology, 

            Vol. 17 035015-035029 ,2008

 

97.       “Spatially Resolved Temperature Measurements of Atmospheric Pressure Normal Glow Microplasmas in Air”

            with  D. Staack, A. Fridman, and A. Gutsol,  IEEE Transactions Plasma Science, Vol. 35, 5, 1448-1455, October 2007

 

96.       “Large eddy Simulations of the Flow Field and  Temperature Separation in the Ranque-Hilsch    Vortex tube”,

             with T. Farouk,  Int. J. Heat Mass Transfer, Vol. 50, 4724-4735, November 2007

 

95.       “Modeling of Direct Current Micro-plasma Discharges in Atmospheric Pressure Hydrogen”

            with  T. Farouk,  D. Staack, A. Fridman, and A. Gutsol,  Plasma Sources Sci. Technol.

            Vol. 16, 619–634, November 2007

 

94.       "Computational Fluid Dynamic Analysis of the Effects of Reactor Configuration on  Disinfection Efficiency ",

            with D. G. Greene, and C. N. Haas ,Water Environment Research, Vol. 78(9), 909-919, October 2006

 

93.       “Spectroscopic Studies and Rotational and Vibrational Temperature Measurements of  

            Atmospheric Pressure Normal Glow Plasma Discharges in  Air”, with D. A. Staack, A. F.Gutsol and

            A. A. Fridman , Plasma Sources Science and Technology, Vol. 15, 818-827,   September  2006,

 

92.       “Simulation of dc Atmospheric Pressure Argon Micro Glow Discharge” with  T. Farouk,  D. Staack,

            A. Fridman, and A. Gutsol  Plasma Sources Science and  Technology, Vol. 15, 676-688, August 2006

 

91.       “Flows Induced by Thermoacoustic Waves: Effects of Gravity”, with Y. Lin and E. S. Oran   

            AIAA Journal of Thermophysics and Heat  Transfer, Vol. 20, No. 5, 376-383, July 2006

 

                                                                 2005 - 2001

 

90.       “Use of CFD for Wastewater Disinfection Process analysis: E.coli Inactivation with Peroxyacetic Acid”,

            with D. Santoro, T. A. Bartrand, D. J. Greene,  C. N. Haas, M. Notarnicola, and L.  Liberti, 

            International Journal of Chemical Reactor Engineering, Vol. 3, A46, 2005

 

89.       “Heat Transfer Enhancement by Acoustic Streaming in an Enclosure”, with M. Aktas and Y. Lin,

            ASME Journal of Heat Transfer, Vol. 127, No. 12, 1313-1321, December 2005

 

88.       “Atmospheric Pressure Plasma Microdischarge: A Characterization Study”, with D. Staack, A. Fridman and A. Gutsol ,

            Plasma Sources Science and Technology, Vol. 14, 700 -711, October 2005

 

87.       “Numerical Simulation of Acoustic Streaming Generated by Finite Amplitude Standing Waves in an Enclosure”,

            with M. Aktas,  Journal of the Acoustical Society of America, Vol. 116, No. 5, 2822-2831, November 2004

 

86.       “Thermoacoustic Waves in Water”, with M. Aktas, P. Narayan ad M. Wheatley, Physics of Fluids B,

            Vol. 16, No. 10, 3786-3794, October 2004

 

85.       "CFD Design Approach for Chlorine Disinfection Processes", with D. G. Greene, and C. N.

Haas,  AWWA. Journal, Vol.96, No. 8, 138-150, August 2004

 

84.       “Numerical Simulations of Gas/Liquid Transport in Centrifuges”, with F. Yan,  ASME J. Fluids Engineering,

            Vol. 125, 1033-1042, November 2003

 

83.       “Numerical Simulations of Electrostatically driven Liquid Jets”, with F. Yan and F. Ko,

            Journal of Aerosol Sciences, Vol. 34, 99-116, February 2003

 

82.       “Numerical Prediction of Developing Natural Convection in an Enclosure due to Rapid Heating”,

            with M. Aktas, International Journal of Heat Mass Transfer, Vol. 46, No. 3, 2253-2261, March 2003

 

81.       “Numerical Simulation of Chlorine Disinfection Processes”, with D. J. Greene and C. N. Haas,

            Water Science and Technology: Water Supply, Vol. 2, No. 3, pp. 167-173, September 2002

 

80.       “Computations of Mixing of Two Parallel Gas Streams in Microchannels  using Direct Simulation

            Monte Carlo Method”, with F. Yan, Microscale Thermophysical Engineering, Vol. 6, 3, 235-251, August 2002

 

79.       “Computations of Low Pressure Fluid Flow and Heat Transfer in Ducts using Direct

Simulation Monte Carlo Method”, with F. Yan, ASME  J. Heat  Transfer, Vol. 124, 609-616, August 2002  

 

78.       “Effects of Design and Operating Variables on Process Characteristics in RF Methane Discharge”,

            with K. Bera and Y. Lee,  Plasma Sources Science and Technology, Vol. 10, 211-225, June 2001

 

77.       “Inductively Coupled RF Methane Plasma Simulation”, with K. Bera and P. Vitello,

             Journal of Applied Physics D, Vol. 34, 1479-1490, May 2001

 

                                                                   2000 - 1996

 

76.       “Low Dielectric Fluorinated Amorphous Carbon Thin Film Grown from C6H6 and Ar

            Plasma”, with J. W. Yi and Y.H. Lee,  Thin Solid Films, Vol. 374, 103-108, 2000

 

75.       “Thermal Conductivity Measurement of Thin Diamond Films Using a Modified Thermal

Comparator Method”, with K. R. Cheruparambil, J. E. Yehoda and N. Macken,

ASME  J. Heat Transfer, Vol. 122, 808-816, November 2000

 

74.       “Thermoacoustic Waves in an Enclosure” with E. S. Oran and T. Fusegi,  Physics of Fluids B,

            Vol. 12, No.5, 1052-1061, May 2000

 

73.              “Two-dimensional Radio-Frequency Methane Plasma Simulation: Comparison with

            Experiments”, with K. Bera,  W. J. Yi and Y.H. Lee, IEEE Transactions on Plasma Science,

            Vol. 27, No. 5, 1476-1486, October 1999

 

72.              “Simulation of Thin Carbon Film Deposition in a Radio-Frequency Methane Plasma  Reactor”,

            with K. Bera . W. J. Yi and Y.H. Lee, Journal of the Electrochemical  Society, Vol. 146, No. 9, 3264-3269,

            December 1999

                                                                                                           

71.              "Two-Dimensional Modeling of Radio-Frequency Methane Plasma"  with K. Bera and Y.H. Lee,

            Plasma Sources Science and Technology, 8, No. 3, 412-420, August 1999

 

70.       “Heat Transfer  from a Liquid Bath due to an Impinging Gas Jet: Effect of Liquid Prandtl Number “

            with F. Qian, R. Mutharasan and N. Macken , ASME Journal of Heat Transfer,  121, 333-340, May 1999

 

69.       “Modeling of Thermal Treatment of Solid Wastes in Electric Arc Melters for Materials Recovery”,

            with A. Wenger and K. Wittle, Journal of Air and Waste Management, 49, 279-288, March 1999

 

68.       “Effects of Gas Composition and RF Power  on Properties of  a-C:H/SiC:H  Composites Thin Films

            Grown by PECVD”, with   J.W. Yi,  and Y.H. Lee, Thin Solid  Films, 326, 154-159, July 1998

 

67.       “Two- and Three-phase Flows in Bubble Columns: Numerical Predictions and Measurements”,

            with D. Mitra-Majumdar , Y.T. Shah, N. Macken and Y. K. Oh, Ind. Engineering Chem. Research,

            37 (6), 2284-2292, June 1998.

 

66.       "Modeling of Two-dimensional Radio-frequency Methane Glow Discharge in Cylindrical Geometry",

            with K. Bera and Y.H. Lee, JSME International Journal, Special Issue on Fluids Engineering, 41, 1-2, 132-138,

            May 1998

 

65.       “Thermal Conductivity of DLC (Diamond-like Carbon) Films and its Relation to Mechanical and Chemical Properties”,

            with C. Mesyngier, Y.H. Lee, J.W. Yi and D.W. Brown, Journal of Chemical Vapor Deposition, 6, 4, 323-337,

            April 1998

 

64.       “Modeling of RF Plasma Discharge of Methane for Carbon Film Deposition”, with K. Nagayama and

            Y.H. Lee, IEEE Transactions on Plasma Science , 26, 2, 125-134, April 1998

 

63.       “Modeling a Direct-Contact Condenser for Metal Recovery”, with H. Turkoglu and L. Yang,

            Numerical Heat Transfer, Part A, Vol. 33, 457-475, March 1998

 

62.       “Hydrodynamic Modeling of Three-Phase Flows through a Vertical Column” with D. Mitra-Majumdar and

             Y.T. Shah, Chemical Engineering Sciences, S2 (24) : 4485 -4498, December 1997

 

61.       “Modeling of Granular Flow and Heat Transfer of Contaminated Soil within a Rotary Calciner”,

            with L. Yang, Journal of Air and Waste Management, Vol. 47, 1189-1196, November 1997

 

60.       “Modeling of Thermal Treatment of Hazardous Solid Wastes in a DC Arc Melter”, with A. Wenger, J. K. Wittle,

            Journal of Air and Waste Management, Vol. 46, 1162-1170, December 1996

 

59.       “Studies of Deformations in a Liquid Bath due to Direct Impinging Gas Jet”, with F. Qian and R. Mutharasan,

            Metallurgical  and Materials Transactions B,  27B, 911-920,  December 1996

 

58.       “Neutral and Charged Particle Simulations of Ar Plasma”, with K. Nagayama and Y.H. Lee,  

            Plasma Sources Science and Technology, Vol. 5, 685-695, 1996

 

57.       “Effects of Gas Composition and Bias Voltage on the Structure and Properties of  a-C:H/SiO

            Nanocomposites Thin Films Prepared by PECVD”, with J.H. Lee,  and Y.H. Lee, 

            Journal of Vacuum Science and Technology A, Vol. 14, 2702-2711, 1996

 

56.       “Influence of Ion Energy Flux on Structure and Optical Properties of a-C:H Thin Films” with J.H. Lee, 

            and Y.H. Lee,  Journal of Applied Physics, Vol. 79, 1-12, 1996

 

55.       “Mechanical Properties of a-C:H and a-C:H/SiOx Nanocomposite Thin Films Prepared by Ion-Assisted

            Plasma Enhanced Chemical Vapor Deposition” with J.H. Lee, D.S. Kim and Y.H. Lee,  Thin Solid Films,

            Vol. 280, pp. 204-210, November 1996

 

54.       “Phase-resolved Measurements in a Gas-injected Liquid Bath”, with H. Turkoglu, International  Journal of

            Heat and Mass Transfer, Vol. 39, No. 16, pp. 3401-3416,  November 1996

 

53.       “Effects of RF Power on Plasma Phase Reactions and Film Structure in Deposition of a-C:H by Styrene/Argon

            Discharge”, with J.H. Lee, D.S. Kim and Y.H.  Lee,  Journal of Electro-Chemical Society, Vol. 143, pp.1451-1458,

             July 1996

 

52.       "Turbulent Natural Convection - Non-Gray Radiation Analysis in  a Square Enclosure" with C. Mesyngier, 

            Numerical Heat Transfer, Part A, Vol. 29, pp.671-687, June 1996

 

                                                                                 1995 - 1991

 

51.       “Effects of Oxidation on Optical Properties of Polymer-like and Diamond-like Amorphous Hydrogenated Carbon Films”

            with J.H. Lee, D.S. Kim and Y.H. Lee,  Materials Science Letters, Vol. 14, pp.1132-1142, December 1995

 

50.       “A Model for Two-phase  Turbulent Mixing in a Jet Bubble Column”, with Y. T. Shah and D. Mitra-Mazumdar,  

            Canadian Journal of Chemical Engineering, Vol. 73, pp.772-778, October, 1995

 

49.       “Modeling of Fluid Flow and Heat Transfer in the Plasma Region of the Electric Arc Furnace”, with F. Qian and

            R. Mutharasan, Metallurgical  and Materials Transactions B, Vol. 26B, 1057-1067, October 1995

 

48.       'Transport of Gas-Liquid Flows through Vertical Columns", with Y. T. Shah and D. Mitra-Mazumdar,

            Chemical Engineering Communications, Vol. 137, pp. 191-209, July 1995

 

47.       "Mixed Convection Flows within a Horizontal  Annulus with  Heated Rotating Square Inner Cylinder",

            with L. Yang,  Numerical Heat Transfer, Vol. 28, No.1, pp. 1-18, July 1995

 

46.       "Numerical Simulation of Subcooled Boiling of Heat Transfer in a Vertical Pipe", with J. C. Lai,  

             International Journal of Heat & Mass Transfer , Vol. 36, No. 6, 1541-1551, April 1993

 

44.       “Rebuttal on the note, ’Considerations Concerning the Numerical Computations of Mixing Times in Steelmaking Ladles’

            by Mazumdar and Guthrie” with H. Turkoglu, The Iron and Steel  Institute of Japan Journal,  Vol. 33, 517-518,

            April 1993

 

43.       "Three Dimensional Mixed Convection Flows in a Horizontal Annulus with a Heated Rotating Inner Circular Cylinder",

            with L. Yang, International Journal of Heat & Mass Transfer,  Vol. 35, No. 8, 1947-1956, November 1992

 

42.       "Effect of Gas Injection Velocity on Mixing and Heat Transfer in Molten Steel Baths", H. Turkoglu, 

            Numerical Heat Transfer , Part A,  Vol. 21, 377-399, October 1992

 

41.       “Three-Dimensional Predictions of Silicon Deposition in a Barrel Reactor”, with L. Yang and R. L. Mahajan ,

               Journal of Electrochemical Society,  Vol. 139, No. 9, 2666-2673, September 1992  

 

40.       "A Numerical and Experimental Study of the Solidification Processes in a Twin-Belt Caster", with

             D. Apelian and Y. G. Kim ,  Metallurgical  Transactions B , Vol. 23, 477-492, August 1992

 

39.       "A Numerical Study on the Solidification Processes in a Twin-belt Caster", with  Y. Kim and

            D. Apelian ,  Numerical Heat Transfer , Part A,  Vol. 20, 375-393, January 1992

 

38.       “Mixing Time and Liquid Circulation Rate in Steelmaking Ladles with Vertical Gas Injection”,

            with H. Turkoglu, The Iron and Steel Institute of Japan Journal,  Vol. 31, 1371-1380, December  1991

 

37.       "Numerical Simulations of the Structure of Supersonic Shear Layers", with E. S. Oran and K. Kailasanath,  

             Physics of Fluids , Vol. 3, No. 11, 2786-2798, November 1991

 

36.       “Natural Convection-Radiation Interactions in a Cube Filled with a Nongray Gas”,  T. Fusegi, K. Ishii and

            K. Kuwahara, Numerical Heat Transfer,  Part A, Vol. 19, 207-217, July 1991

 

35.       "A Numerical Study of Three-Dimensional  Natural Convection in a Differentially Heated Cubical 

            Enclosure", with T. Fusegi, J. Hyun  and K. Kuwahara, International Journal of Heat & Mass Transfer,

            Vol.  34, No. 6, June 1991

 

34.       "A Mathematical Model for Thermal Analysis of Thin Strip Casting of Low Carbon Steel”, with

            Y. G. Kim and J. Keverian , ASME Journal of Engineering  for Industry, Vol. 113, 53-58, February 1991

 

                                                                  1990 - 1986

 

33.       "Numerical Computations of Fluid Flow and Heat Transfer in Gas Injected Iron Baths", with  H. Turkoglu,

            The Iron and Steel Institute of Japan Journal,  Vol. 30, 961-970, November 1990

 

32.       "Numerical Computations of Fluid Flow and Heat Transfer in a Gas Stirred Liquid Bath", with  H. Turkoglu , 

            Metallurgical  Transactions B , Vol. 21, 771-781, August 1990

 

31.       "Interaction Analysis of Natural Convection and Surface/Gas Radiation in a Square Enclosure",

            with T. Fusegi, ASME Journal of Heat Transfer, Vol. 112, 802-804, August 1990

 

30.       "Effects of Particle Loading on R.F. Inductively Coupled Plasma Torch Flowfield and Particle Melting Behavior",

            with D. Wei and D. Apelian,  Metallurgical  Transactions B Vol. 20, 949-958, December 1989

 

29.       "A Flow Visualization Study of the Effects of Buoyancy on Taylor Vortices", with K. S. Ball, Physics of Fluids A,

            Vol. 1, No. 9, 1502-1507, September 1989

 

28.       "An Experimental Study of Heat Transfer  in a Vertical Rotating Annulus", with K. S. Ball,  

            International Journal of Heat & Mass Transfer, Vol. 32, No. 8, 1517-1528, August 1989  

 

27.       "Natural Convection - Radiation Interactions of a Non-gray Gas in a Square Enclosure" with

            T. Fusegi,  Numerical Heat Transfer, Part A, Vol. 15, 303-322, May  1989

 

26.       "Particle Melting in High Temperature Supersonic Low Pressure Plasma Jets", with D. Y. C. Wei

             and D. Apelian , Metallurgical  Transactions B ,Vol. 20, No. 2, 251-262, April 1989

 

25.       “Natural Convection of a Variable Property Gas in Asymmetrically Heated Square Cavities", with  T. Fusegi ,

            AIAA Journal of Thermophysics and Heat  Transfer, Vol. 3, No. 1, 85-87, January 1989

 

24.       "Numerical Study on Interactions of Turbulent Convection and Radiation in Compartment Fires" with T. Fusegi,

            Fire  Science and Technology, an International Journal, Vol. 8, No. 1, 15-28, December 1988

 

23.       "Bifurcation Phenomena in  Taylor-Couette Flows with Buoyancy Effects", with K. S. Ball ,

            Journal of Fluid Mechanics, Vol. 197, 479-501, December 1988

 

22.       "Natural Convection around a Buried Heated Cylinder  in Saturated  Porous Medium:", with H. Shayer 

            ASME  Journal of Heat Transfer, Vol. 110, 3, 642-648, August 1988

 

21.       "Melting Metal Powder Particles in an Inductively Coupled R. F.  Plasma Torch", with D. Wei and D. Apelian, 

            Metallurgical Transactions B , Vol. 19, 213-226, April 1988

                       

20.       "Turbulent Thermal Convection in an Enclosure with Internal Heat Generation " ASME Journal of Heat Transfer ,

            Vol. 110, 1, 126-132, February 1988

                                               

19.       "Melting Powder Particles in a Low Pressure Plasma Jet", with D. Wei and D. Apelian ,

            ASME Journal of Heat  Transfer , Vol. 109, 4, 971-976, November 1987

 

18.       "On the Development of Taylor Vortices in a Vertical Annulus   with a Heated Rotating Inner Cylinder", with K. S. Ball,  

             International Journal for Numerical Methods in Fluids, Vol. 7, 857-867, September 1987

 

17.       "A Microprocessor Based Data Acquisition System for Thermo-Fluids   Laboratories", with K. S. Ball ,

            Review of   Scientific Instruments, Vol. 58 (4), 657 - 659, April 1987

 

16.       "Discussion on the paper by T. S. Lee, Numerical Heat Transfer, vol. 7, 77 -87, 1984", with T. Fusegi and K. S. Ball ,

            Numerical Heat  Transfer - An International Journal of Computation  and Methodology, Vol. 10, 103, July 1986

 

15.        "Predictions of Fluid Flow and Heat Transfer Problems by the Vorticity-Velocity Formulation of the

            Navier-Stokes Equations",  with T. Fusegi ,  Journal of Computational Physics, Vol. 65, No. 1, 57 -74,  July 1986

 

14.       "Mixed Convection Flows within a Horizontal Concentric Annulus with  Heated Rotating Inner Cylinder",

            with T. Fusegi and K. S. Ball , Numerical Heat Transfer - An  International Journal of Computation and

            Methodology, Vol. 9, 591 -604, May 1986    

           

13.       "Natural Convection Heat Transfer from a Horizontal Cylinder between  Vertical Confining Adiabatic Walls",

            with F. Karim and I. Namer,   ASME Journal of Heat Transfer , Vol. 108, 291-298, May 1986

 

                                                                     1981 - 1985

                       

12.       "A Coupled Solution of the Vorticity-Velocity Formulation of the Incompressible Navier-Stokes Equations", with

            T. Fusegi, International Journal Numerical Methods in Fluids ,Vol. 5, 1017 -1034, 1985

 

11.       "Convection Heat Transfer from a Rotating Cylinder", with K. S. Ball , International  Journal of  Heat and Mass Transfer ,

             Vol. 28   No. 10,  1921-1935, 1985

                                               

10.       "An Experimental Study of Mixed Convection around a Rotating  Isothermal Cylinder", with K. S. Ball,

            International  Communications in Heat and Mass Transfer, Vol. 12, No. 6,    657-666, November 1985

 

9.         "Thermal Insulation Evaluation for a Housing Development Project", with  J.L. Hamill, ASHRAE Transactions,

            Vol. 91, Part 1, 240-254, July 1985

 

8.         "Mixed Convective Flows around  a Slowly Rotating Isothermal  Sphere", ASME Journal of Heat Transfer,

            107, 431-438, May 1985

 

7.         "On Selecting a Microcomputer for 1800 Freshmen at Drexel" with A. L. Smith  et al. Collegiate Microcomputer,

            Rose-Hulman Institute of  Technology, Terra-Haute, Indiana, Vol. 2, No. 2, 107-112, May 1984

 

6.         "Transient and Steady State Natural Convection in a Porous Medium  between Two Concentric Cylinders",

            with G. N. Facas, ASME Journal of Heat Transfer, 105, 660-663, August 1983

                                   

5.         "Natural Convection from Horizontal Cylinders in Interacting Flow Fields", with S. I. Guceri,

            International Journal of Heat  and Mass Transfer Vol. 26, No. 2, 231-244, February 1983

 

4.          "Laminar and Turbulent  Natural Convection in the Annulus Between Horizontal  Concentric Cylinders",

              with S.I. Guceri, ASME Journal of Heat Transfer, 104, 621-636, November 1982

           

3.         "Natural and Mixed Convection Heat Transfer around  a Horizontal Cylinder within Confining Walls",

            with S.I. Guceri, Numerical Heat Transfer - An   International Journal of Computation  and Methodology, 

            Vol. 5, No. 3, 329-341, September 1982

 

2.         "Natural Convection from a Horizontal Circular Cylinder-Turbulent  Regime", with S.I. Guceri,

            ASME Journal of Heat Transfer 104, 228-235, May 1982

 

1.         "Natural Convection from a Horizontal Circular Cylinder - Laminar  Regime", with S.I. Guceri,

            ASME Journal of Heat  Transfer, 103, 522-527,  August 1981